ETX® microSERVER This product is legacy

Compact ETX® carrier board with built in HDD support
Specifications
  • Board dimensions just 118.5 x 116.3 mm (4.7" x 4.6")
  • Scaleable via ETX®-CPU module
  • 3x 10/100 MBit Ethernet
  • 2x USB
  • 2x RS232 serial ports
  • LPT/FDD interface
  • VGA/JILI LVDS interface
  • Sound
  • DIMM-PC/IO socket for add on cards:
  • 10 MB Ethernet
  • Analog Modem V.92
  • ISDN
  • or Bluetooth
  • IDE HDD or CompactFlashCard socket onboard
  • 9 - 32 V power input range
  • 2x PS/2

ETX® microSERVER: maximum CONNECTIVITY @ minimum SIZE

The The ETX® microSERVER is a compact carrier board, which allows the rapid development of numerous ETX® module-based solutions. Sometimes it is not necessary to design your own custom base board when there's a small embedded PC (module and carrier board) that will do the job.

Beneath all ETX® standard interfaces, the ETX® microSERVER offers two independent 10/100Base-T controllers and a DIMM-IO socket for further enhancements like BlueTooth? modules or modems. So building intelligent and scaleable routers or segmenting a network is now an easy task.

To learn more about this product, please contact:
microSERVER@kontron.com.

Features

Hard Disk 2 x IDE ports, 1st IDE port for onboard HDD, 2nd IDE port for further IDE/ATAPI drives (CDROM,...)
Panel signal LVDS (JILI) panel interface
Special Features Scaleability (via ETX® CPU modules). DIMM-IO enhancement socket for xDSL (10Base-T), analog Modem, V.90, ISDN or BlueTooth™ module. Boxed versions available.
Serial 2x RS232 Serial ports
Audio Sound interface
Graphics VGA interface
Parallel Port LPT interface
Mouse PS/2 mouse
Keyboard PS/2 keyboard
Mounting Onboard mounting socket for 2,5” HDD or CompactFlash Card™
Ethernet 10/100Base-T ports: 3 x separate and independent 10/100Base-T ports
Dimensions (H x W x D) 118,5 x 116,3 mm (4,7“ x 4,6“)
Power Supply 9 - 32 V
Wireless connectivity WLAN connectivity in preparation.
Interface FDD interface
Flash Onboard mounting socket for 2,5” HDD or CompactFlash Card™

Downloads

Use Cases

Computer On Modules Magazine - 2007
With high scalability and Value-Add Service for your customized solution
[ computer_on_modules_brochure2007.pdf, 7.01 MB, Nov.27.2013 ]

Datasheets

microSERVER‚ datasheet
[ microserver2.pdf, 136.06 KB, Jan.09.2026 ]

Manuals

microSERVER Manual
[ hub1m129.pdf, 2.49 MB, Sep.11.2017 ]

General Safety Instruction
[ general-safety-instructions.pdf, 560.72 KB, Dec.16.2025 ]

White Papers

ETX® Specification V3.02
Specification for ETX® Modules, V. 3.02
[ etxspecv3-02.pdf, 482.98 KB, Apr.20.2023 ]

Case Study: UL Certified COMs Deliver Quality
[ wp_ul_2007.pdf, 137.82 KB, Jun.26.2020 ]

Application Notes

ETX-PM Thermal Design Guidelines
[ pm_thermal_guidelines_e111.pdf, 260.94 KB, Nov.27.2013 ]

Restoring and Updating of Phoenix BIOS on Embedded Components
[ phlash_ec_e112.pdf, 145.21 KB, Nov.27.2013 ]

Examples of JUMPtec® Remote Control (JRC) usage
[ jrcusage_e116.pdf, 121.28 KB, Jun.26.2020 ]

JILI on ETX® & X-board®
[ jili3_short_e211.pdf, 78.43 KB, Nov.27.2013 ]

Layout Recommendations: VIAs near ETX® – Connectors on ETX Baseboard
Layout Recommendations: VIAs near ETX® – Connectors on ETX Baseboard
[ jap0061.pdf, 48.37 KB, Nov.27.2013 ]

Getting Started: ETX® and JILI
[ jap0051.pdf, 63.1 KB, Nov.27.2013 ]

Expansion of PCI Request/Grant Pairs (Busmaster)
[ jap0049.pdf, 56.23 KB, Nov.27.2013 ]

Mechanical Specification ETX® Module and Backplane Layout
[ jap0043.pdf, 740.5 KB, Nov.27.2013 ]

Connecting an external Super I/O controller to ETX® or PC/104
[ jap0033.pdf, 201.11 KB, Nov.27.2013 ]

I2C bus on Kontron Embedded Modules GmbH boards
[ jap0012.pdf, 299.12 KB, Nov.27.2013 ]

Interrupt Latency on ETX® boards
[ etx_int_latency.pdf, 38.64 KB, Nov.27.2013 ]

Darkboot Logo on Kontron Embedded Modules boards with Phoenix BIOS
[ darkboot.zip, 55.2 KB, Nov.27.2013 ]

Limited 24 bit LVDS support on boards with Intel® 855 GM(E) chipset
[ 24bit_855_e110.pdf, 38.04 KB, Mar.05.2021 ]

OS-Setup via USB CD-ROM drive
[ linux_usbcde110.pdf, 45.55 KB, Nov.27.2013 ]

Services

Kontron Services Brochure
[ kontron-services-brochure.pdf, 8.9 MB, Dec.17.2020 ]

Variants

MICROSERVER/CFC
18016-0000-00-2
Compact ETX® carrier board with Compact Flash socket more

Accessories

ADA-FLOPPY-2
96001-0000-00-0
ADA-FLOPPY-2 ADA-FLOPPY-2, adaptor and cable to connect a standard floppy drive to any MOPS more
KAB-VGA-2
96053-0000-00-0
KAB-VGA-2 Adapter cable from molex connector to CRT (15 pin DSUB) connector more
KAB-DSUB9-2
96017-0000-00-0
KAB-DSUB9-2 KAB-DSUB9-2, DSUB9 male Connector to 10 pin Header cable, DSUB COM port cable more
ADA-SOUND-1
96001-0000-00-1
ADA-SOUND-1, adapter board with cable for SOUND interface of microSERVER carrier board more
ETX® Mounting Kit 3mm
18017-0000-00-0
ETX® mounting kit, includes screws and spacers for heatspreader  
ADA-LPT-1
96001-0000-00-3
ADA-LPT-1, adapter board with flat foil cable for parallel printer or FDD use on microSERVER carrier more
ADA-PS/2-1
96001-0000-00-2
ADA-PS/2-1, adapter board with cable for PS/2 interface more
KAB-PS/2Y-1
96001-0000-00-4
KAB-PS/2Y-1 KAB-PS/2Y-1, Y-cable for parallel use of PS/2 keyboard and mouse more
KAB-ADAPT-LVDS
61032
KAB-ADAPT-LVDS Evaluation Board to adapt LVDS flatpanels via JILI cable. more


back
Contact Sales 1-888-294-4558 / 858-623-3094 Contact Sales Support 888-835-6676 / +1 450-437-5682 Contact Support
More Contact Options