For support related inquires, please contact our support team:
Contact SupportFor support related inquires, please contact our support team:
Contact Support
High Performance, Low Power and Way Out in Front
Kaufbeuren, 17 February 2004: Kontron, a leading embedded computer technology company, today unveiled two new cPCI 6U boards based on the Intel® Pentium® M processor - the CP6000 and the CP6011. Both boards combine high performance with low power. The CP6011 is uncompromisingly geared towards providing high-performance for high bandwidth applications while the CP6000 is cost/performance optimized with a price 300 Euro less than the CP6011.
The Pentium M processor on both boards is passively cooled and is available in either the 1.1 GHz or 1.6 GHz version. Performance of a 1.6 GHz Pentium M processor matches that of a conventional Intel Pentium 4 processor clocked at 2.4 to 2.7 GHz. Regarding power consumption, a Pentium M processor generates only half the heat of a Mobile Intel Pentium 4 Processor-M while providing the same level of performance. The reduced heat emission means less cooling is required in the system, which further serves to reduce the cost and complexity of system integration.
Further features shared by the CP6000 and CP6011 are the identical CompactPCI rear I/O pinout as well as the Intelligent Platform Management Interface (IPMI) firmware that supports the PICMG 2.9 specification.
More About the CP6000
The CP6000 combines the low power/performance features of the Intel Pentium M processor with the 855GME chipset. With up to 4 Gigabit Ethernet ports (2x ports at the front and 2x for full PICMG 2.16 support via the rear J3 connector) the CP6000 is tailored to support cost-effective, performance-oriented data and telecommunications applications, media gateways, networking and switching applications, avionics and industrial automation systems and more.
Highly integrated and compact, the CP6000 features a single PCI-X PMC site, on board 2.5-inch hard disk (optional) and compact flash site, which can all be used simultaneously in a single slot. This is made possible by the Intel 6300ESB I/O controller hub (Hance Rapids), which includes USB 2.0 for 40X faster data transfer rate compared to USB1.0, Serial ATA150 and onboard 64/66 PCI-X bus. Memory is fast and reliable (ECC) with up to 2GByte of PC333 DDR SDRAM via two 200-pin SODIMM sockets. As an option, the 1.1GHz version of the CP6000 can be ruggedized for use in the E2 extended temperature range (-40ºC to +85ºC).
With the 855GME chipset, the CP6000 provides high-resolution graphics and multimedia-quality video via the integrated graphic controller. The controller uses Intel¿s Extreme Graphics 2 Technology (2D/3D graphics accelerator) to provide a 2048 x 1536 x 8 Bit/60Hz pixel resolution. In addition to VGA, USB and COM interfaces, the front panel of the CP9000 hosts various user programmable LEDs, which can be used for debugging and diagnostics.
The CP6011 in Detail
The CP6011 combines the low power/performance features of the Pentium M processor with the high I/O bandwidth .........
Kontaktadresse für diese Pressemitteilung:
Kontron Modular Computers GmbH
Sudetenstr. 7
DE-87600 Kaufbeuren
sales@kontron.com
sales@kontron.com
Tel: +49(8341)803-0
Fax: +49(8341)803-499